Radium FCST-X Fuel Cell Surge Tank

Confirm compatibility with your vehicle

Listed for Ford Falcon

To install a Radium Engineering FCST-X into a fuel cell, the following criteria must be met:

The fuel cell must have the industry standard 6"x10", 24-bolt flange opening.

The opening must be on the top face of the fuel cell (i.e.

The cell depth must be at least 7.7" (196mm) measured from the outer top face to the internal bottom face.

However, 20-0535 can be purchased separately with a 12AN male fitting for quick fill dry break systems that require a high-flow vent.

The fuel cell MUST use a 6x10, 24-bolt fill plate flange.

The distance from the outer top face to the internal botton face must be at least 7.7" (196mm).

A hose and/or filter must be connected to the "VENT" port fitting.

Fuel pumps must be sourced separately.

A filter sock is only used for the lift pump as inlet filters are already supplied for the surge tank pumps.

*Because this pump does not include a built-in check valve, multiple surge pumps must be ran together (not staged).

*This pump requires a brushless controller.

Send us your vehicle details and we’ll check compatibility before dispatch.